Mold on Bathroom Ceiling Testing
Removing mold on bathroom ceiling surfaces can be accomplished fairly easily, provided the fungus is only growing on the surface and has not penetrated into the drywall, plaster or whatever type of substrate your ceiling is comprised of.
An easy way to test for mold or mildew on your paint is to apply a few drops of household bleach to the stain. If the stain is mold it will bleach away quickly, if it does not disappear then it is probably a dirt stain instead. If your bathroom ceiling has been painted with semi gloss paint then removal should be as simple as scrubbing with a soapy warm rag to remove the offending substance.
After reading this article in its entirety you should be adequately prepared to tackle any mold or mildew problems which may arise in your bathroom.
Tracking Down the Source of Ceiling Mold in the Bathroom
Hopefully the mold in bathroom ceiling problem is actually not in the ceiling but simply on the paint of the ceiling and can quickly and easily be dealt with. Usually the bathroom ceiling mold that you are seeing is only on the surface as long as there are no other underlying problems such as a leak from an upstairs water source, or even worse a roof leak. Many times the underlying cause of a downstairs ceiling stain problem can be traced back up to the upper stories. If either of these are the cause of your moldy bathroom ceiling, then you will certainly need to deal with that problem before you make an attempt at removing mold from your bathroom ceiling surfaces.
How to Clean Mold off of the Ceiling
Finding and repairing the source of a mold problem is usually the easiest part of the remediation process. Once you have determined the source that has caused a moldy bathroom ceiling, and that issue has been dealt with, then you can take the appropriate course of action in order to remedy the situation. If by chance the mold is simply on the paint then you can simply spray a little vinegar and water mixture at either a 50/50 solution or just use straight vinegar if the mold is rather heavy. Allow the mixture to dwell on the surface and remain wet for as long as possible, reapply if necessary to keep the surface wet with the vinegar solution.
Wait approximately 1 hour or so and simply use an old rag to wipe away the black mold on the bathroom ceiling. Sometimes extremely heavy deposits of mold on a bathroom ceiling will require more than one application for complete removal.
Bathroom ceiling mold removal is not rocket science, but it does take some persistence and a little know how to make the job go smoothly and easily. Always take the appropriate safety precautions especially using the personal protective equipment (also known as PPE in the industry)
How to Keep the Mold From Returning to Your Bathroom
If you have a very busy household with lots of family members using the same shower day in and day out, you may wish to consider purchasing a bathroom dehumidifier that will help remove all of the excess moisture that is generated every day by every shower. There are many models available that are in the small to mid range size which, if used after every family member showers will consistently remove all excess moisture from the bathroom area.
Mold on the ceiling of a bathroom, if not kept in check and dealt with regularly can lead to a much more costly repair if it should make its way through the paint and into the drywall and after that into the wooden framing which is supporting the drywall. Once it has gone this far it may be very difficult to remove mold from bathroom ceilings without having to tear out all of the ceiling and possibly replacing some of the ceiling joists if they have suffered some rot in the process.
Install an Exhaust Fan if Necessary
Black mold on bathroom ceiling substrates is very common, especially in older homes that may or may not have appropriate ventilation including a bathroom exhaust ceiling fan or a window to allow excess steam to escape from the room. If your home doesn’t have adequate ventilation in the form of a window of fan, you should definitely consider installing or having one installed pronto to handle the excess moisture. Cleaning mold off bathroom ceiling surfaces must be taken seriously or further damage to your home’s structure can and will result in more costly repairs down the road, not to mention it’s simply ugly to look at that daily while you’re taking a shower, nobody wants to look at mold on bathroom ceiling problems for any longer than necessary.
Is the Mold Damage Beyond Repair?
If the need should arise and you feel there is nothing left to do but remove and replace the drywall ceiling because of mold infiltration here are a few tips:
After replacement and before painting your new drywall use a PVA primer (short for Poly Vinyl Acetate) on your new drywall. This in effect seals the pores of the paper facing of the drywall allowing paint to cover more evenly and not allow moisture an easy way of entry. After you have primed and are ready to paint the new ceiling, simply go to a quality paint store and ask for a top-quality paint that contains agents to inhibit the growth of mold and mildew on the paint surface.
Just think about it, if that were to be the toxic black mold and it was giving off mycotoxins then you would definitely smell it as well as inhale it into your lungs which is not good for anybody especially young children, pregnant women and the elderly as well.
When it’s time to get rid of mold on a bathroom ceiling, hopefully now you have been armed with a slick and simple solution to remove mold on bathroom ceiling surfaces without too much of a hassle, and without using any harsh unknown chemicals which could do more harm than good if not used in the correct manner. No one wants to look at, smell or be affected by any of that nasty black mold substance anywhere in their home but is especially alarming when you have to look at it daily while going about your daily personal hygiene routines.
Mold on Bathroom Ceilings Must Go
The removal of mold on bathroom ceiling surfaces should never ignored or allowed to stay on the surface longer than necessary. Doing so will allow further damage and will ultimately result to the structure and integrity of the ceiling being damaged. With today’s economy in the tank as it is, we all need to do our part to save as much money as possible and to try our best to protect our largest investment starting from the inside out.